Description
Make a Precise Diagnosis with the RadiForce MX217 Medical Monitor
A 21.3-inch 2 megapixel resolution cost-performance diagnostic medical monitor with DICOM® part 14 calibration for viewing medical images.
The RadiForce MX217 Medical Monitor has been expertly designed for precise diagnosis, comfortable viewing and peace of mind. If you want a medical monitor that completely revolutionizes the way you and your wider team view medical imaging, look no further. Here’s everything you need to know about the RadiForce MX217 Medical Monitor…
Hybrid Display of Monochrome and Colour
The Hybrid Gamma PXL function automatically distinguishes between monochrome and colour images pixel by pixel. This creates a hybrid display where each pixel has optimum grayscale. As a result, monochrome images such as CT, MRI and X-ray are displayed in the ideal grayscale that corresponds to DICOM Part 14, while colour images such as 3D rendering, nuclear medicine, ultrasound and endoscopy are faithfully reproduced corresponding to Gamma 2.2. This therefore, helps improve efficiency of viewing both monochrome and colour images by displaying them together on the one screen.
Achieve Clarity True to Source Data
A medical monitor needs to be capable of high brightness in order to meet performance standards. However, in order to achieve high brightness in an LCD panel, the pixel aperture ratio has to be increased. This causes a typically unavoidable decline in sharpness. Although, with EIZO’s unique Sharpness Recovery technology, the decrease in sharpness (MTF) is restored. This allows you to display an image safely on the monitor that is true to the original source data, even at high brightness levels.
MTF measures numerically how faithfully the panel transfers detail from the original image data for viewing. When Sharpness Recovery is turned on, in the case of a 2 pixel line pair (spatial frequency of 0.926 cycles/mm) the MTF increases by over 50%.
Make a Precise Diagnosis
EIZO carefully measures and sets the grayscale at the factory to ensure each monitor is compliant with DICOM Part 14. Furthermore, at start-up or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level and compensates the brightness fluctuations caused by the ambient temperature and the passage of time, allowing medical images to be faithfully reproduced with stable brightness and grayscale.
Comfortable Use, Convenient Connectivity
The medical monitor’s cabinet is designed with rounded corners and elegant curves on the back to present a gentle aesthetic and a comforting environment for patients and medical staff.
Rotate the Monitor According to the Image
After installing the included RadiCS LE quality control software, you can link the Image Rotation Plus function with the monitor’s built-in gravity sensor. This enables the screen to automatically switch to either portrait or landscape mode based on the orientation of the monitor.
Hassle-Free Multi-Monitor Configuration
Using the DisplayPort connection, you can drive several monitors in a daisy chain sequence. This allows you to configure a multi-monitor setup without the complicated hassle of excessive cabling. Though, please note a graphics board that supports daisy chain is necessary.
Rest Assured with Image Consistency
With the RadiCS LE software (included) and Integrated Front Sensor (IFS) built into the front bezel, you can easily calibrate to DICOM Part 14 without having to mount, run, and remove an external sensor.
Want to know more? Contact our specialist team.